Forest River Forums - NWJeeper's Album: Battery Installation

Home
Forums
Classifieds
Photos
Registry
FRF Google

		Forest River Forums > NWJeeper's Profile > Albums
Battery Installation

Registry

Battery Installation

Photos of my battery and inverter installation. 6-Trojan T-125 batteries. Two are up front behind main grill and 4 under step in a custom holder that replaced the factory 2-battery tray.

Xantrex Inverter control panel inside motorhome. Mounted just above the motorhome control center which houses the slide, water pump and water heater...

Xantrex Prosine 1000 mounted in compartment adjacent to the batteries right behind the entry door on our 378. Inverter is hard wired to the main AC...

A scrap piece of 1"x2" tube was welded to the front of the battery rack and then 1.5" wide 3/16" flat bar was welded to this and up to the frame...

1" Angle iron was laid out to hold the 4 batteries and welded together. 3/16" plate was cut for the side and is welded to the frame to hold the...

4 of my 6 volt Trojan T-125s under the main step. Factory battery tray was cut from frame using a plasma cutter and a new tray was fabricated to...

Angle iron was welded between the front rail and frame rail to hold batteries. Short sections of angle iron were welded to the front rail to hold...

Disclaimer:

This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.

All times are GMT -5. The time now is 07:11 PM.