Ken. Did ya get the pix I sent you? You might want to post the tire pix on the "Blowout Thread" for me. I don't think some folks understand just how bad they can be when they go POP!

The 600 wt unit is a Duralast MSW. Paid $49, will take $25. The 1,000 wt unit is also a Duralast, Paid $129+tax. Will take $75. The 1,500 wat unit is a Samlex MSW. Paid $175 and will take $100. None of the units were on line more than two days, just long enough to see I needed more watts. All of these are modified sinewave units.
I have the placement for the 3,000 unit, under the forward seat of the dinnett, in the storage compartment. Good vent but really tough to get to. The worst part of the system was running the wiring from the inverter to the auto transfer switch, and into the elec control panel. I had to remove a large portion of the belly cover to get to the lead in from the units 50 amp plug and the switch, then down into the auto switch. Some really big wires to deal with.
It all works now, just not enough watts to run microwave. That will change when the 3,000 is installed.