For Sale: For Sale super glide 3100 5th wheel hitch

[1surveyor]

For sale 3100 super glide 5th wheel hitch , only used twice and the 1st time was pulling the 5er 25 miles home and the second time was a camping trip that was 60 miles round trip , so basically new. I upgraded my tow vehicle to a 3500 dually and it came with a B&W fifth wheel hitch , i can deliver up to 100 miles away.

$650.00 also has the capture plate with it

Thanks Oak

[1surveyor]

I know someone needs this make an offer needs to go

[jobren4]

Where are you located? I'm in Illinois.
Thanks,John

[campingwilliamsons]

That is an unbelievable deal for that hitch! If I did not already have one, I would take you up on it in a heartbeat.

[1surveyor]

Originally Posted by jobren4

Where are you located? I'm in Illinois.
Thanks,John

i'm about 5 hours west and and north of st. louis

[jobren4]

Originally Posted by 1surveyor

i'm about 5 hours west and and north of st. louis

Are you close to Fort Madison,we go up there every year for rodeo.Will hitch work on my standard rails?
Thanks,John
spencerjb1@yahoo.com

[1surveyor]

i am actually north of kansas city mo about 60 miles ,and it works on a different rail system . mounts to bed frame in 4 different places , and when you pull pins you have a flat bed

[1surveyor]

Originally Posted by 1surveyor

i am actually north of kansas city mo about 60 miles ,and it works on a different rail system . mounts to bed frame in 4 different places , and when you pull pins you have a flat bed

Still for sale

[1surveyor]

Bump for the new year

[Terier]

Moderator note:
Per OP request - this classified ad was reinstated. Hitch is back up for sale.

[1surveyor]

Price Reduced $500.00 need gone

[jobren4]

Have standard rail hitch in my ram 2500 now.What else would I need to purchase to use this hitch in my truck?
Thanks,John

[1surveyor]

jobren , if you look at the picture on the 1st page you will see the pins with hairpin clip's there are brackets that mount to the frame rail in 4 places , then you have 4 holes in the bed of your truck , the pins go into the the holes and then you give them a 1/2 turn locking them in place and the hitch sits down over the pins and you install the hairpins . this hitch is automatic slider you don't have to get out an move a lever to activate , the hitch installed with capture plate and the rails i added to raise the hitch 1 1/2 up higher cost me $3000.00 , the capture plate and the extra riser rails were $335.00 dollars by there self , but i need to get rid of this in the building so $500.00 is what i am asking

you can go to the pullrite website look at the 3100 series n then click on video to see how it works , i had this mounted in an F150 short bed not sure if the brackets would fit a dodge , but even if you or someone needed new rail brackets it is still a great deal

[jobren4]

Still for sale? spencerjb1@yahoo.com Thanks,John

[1surveyor]

Email sent

[1surveyor]

thanks for looking jobren4 , i this it will work in any truck if you have the right mounting brackets , but no worries

[1surveyor]

BUMP

[cbvp]

For those interested in this hitch for a great price that have ISR (industry standard rails) You can purchase from Pullrite #4409 Industry Standard Rail Kit Adapter.


Part #4409 is supposedly available thru Tweetys for around $350.00

We just did this on my Sons standard base rails and installed his Pullrite #4100 Superglide.



C.B.

[1surveyor]

Thanks cbvp , it is a great price

[1surveyor]

ump for May