Is there an adapter to use on the kitchen sink so I can hook up a hose when the camper is in my truck? The drain lines up perfectly with the bed rail and there is zero clearance. I do take the cap off before loading since I can't take it off when it is loaded.
I had the same problem with my Palomino, I made a frame out of 2 X 4 to fit between the Camper and my truck bed, then set the Camper on top of the new "Spacer", this gave me enough clearance to connect a hose to the drain. Have not any problems with this arrangement. (The 2x4 's are laying on their flat side not on the edges). Hope this helps.
Duvie, thanks. I actually have mine sitting on 2 X 4's as well. If I didn't have it on the boards it actually hit the top rail. They actually drilled a new hole and mounted a new connector and hooked the sink drain to it while I was there.