I know I'm hijacking this thread, but not really. One replier said they measured along the frame. Another mentioned using a level. So that makes me wonder what is the correct way of doing it. With a bumper pull, you a WDH. In the Equalizer installation manual, it eludes to measure the frame front and back and level rig by getting same measurements. Now what I've seen, if you do this and put a level on the floor, a majority of the time, the rig won't be level as far as the level indicates. I've seen this on several bumper pulls and confuses me of what to use so that we can get the correct setup on WDH.
2020 Cedar Creek 38DBRK 5'r
2020 Chevy 2500HD Duramax 4X4