Georgetown 373

[Old Drill SGT.]

Need help to remove the Main TV from its mount. Can anyone explain how to get the flat screen TV off its mount? I have no TV signal on any channel and I need to see if the connection is good to the back of the Westinghouse 32" flat screen. Any help is always appreciated!

[SCSTTROOPER]

Could you send us a picture of the TV and if possible behind it so that we can have a better idea of what you are dealing with?

[Old Drill SGT.]

I can not get a photo as it is solid against the cabinet. I was hoping someone had the same issue as me.

[B D HOWie]

ODS
Just going to confirm that you have done the following:

Over the antenna
Turned 'on' the booster switch located on the coax wall plate.
Set TV menu settings to antenna and scanned for stations

Cable from RV park post
Turned the booster switch off.
Set TV menu to cable. Scan for channels.
Paul

[Ttramp]

Originally Posted by Old Drill SGT.

I can not get a photo as it is solid against the cabinet. I was hoping someone had the same issue as me.

If it's solid against the cabinet, shouldn't your connections be on the side or bottom? Maybe a mirror. If they had room to get it on, there should be room to get it off. Hard to tell though w/o pics. Good luck.

[mikel68]

We have a 351DS, assuming main TV is living room, ours has 5 mounted TVs. I had the same issue, however it wasn't the TV, it was the switch box. I bought a new one on ebay or Amazon, can't remember which. The old box had a small crack on the board, almost not visible.

Do you other TVs work? Ours all did, only one that didn't was the living room.

Now for taking it off. I felt like I was gonna rip part of the wall off. With a hand on each side of the TV, VERY firmly force it up. It felt like I was gonna break it but it came off.

Good luck.