LCI Electronic Leveler Control Box

[RickV]

I am starting to have issues with my LCI Electronic Leveler Control Box on/off switch where sometimes you have to press it numerous times to get it to come on. So rather then get stuck somewhere with the jacks down I want to replace the Controller. I have been trying to pop the old unit out so I can get the part# but, I am having problems getting it to release. Is there a trick to getting it to pop out? I don't want to break it.

Thanks in Advance,

Rick

[RickV]

Figured it out took the bracket that held it out and noticed a small tab on the top if you depress it from the backside the plate comes right off. 😎

[Rich5117]

Glad you got it off. My screen went blank had to get a new control unit. Etrailer had the updated unit at a really good price.

[RickV]

Originally Posted by Rich5117

Glad you got it off. My screen went blank had to get a new control unit. Etrailer had the updated unit at a really good price.

Ordered from Amazon they had they best price.

[kayo]

Thanks for the info. This is now my next project!

[RickV]

Originally Posted by kayo

Thanks for the info. This is now my next project!

I wanted to wait until I got the new one and got it installed as the button positions were different. I installed about 2 hours ago. Everything worked just fine didn't have to reset zero calibration eiither. 👍

[kayo]

There are two listed on Amazon. Will they both work?

[RickV]

Originally Posted by kayo

There are two listed on Amazon. Will they both work?

Not sure if I can post a link but this is the one I bought Lippert Components "421484" Black Ground Control TT Leveling Touchpad was $216

[kayo]

Thanks. That will do it

[kayo]

Lastly question:; do they both take the wire plug-in?

[RickV]

Originally Posted by kayo

Lastly question:; do they both take the wire plug-in?

It took the same white plug. Basically plug and play.😎🐐