2018 39A ice maker isn't working

[Dijoeboss]

Ice maker has been working fine until our last 2 trips. Not sure where to even begins trying diagnose the concern, the on-off lever is in the down position. Any input greatly appreciated.....

[Dijoeboss]

[Igave]

And the water supply line valve is still open? Any chance also of an air lock from between uses?

[dave-g]

reach in and see if there is water in the tray, If there is- it just has not gone into harvest. There is a thermostat in the ice tray that must get below zero to put it into harvest. So make sure the freezer is set to in its normal spot.

If not water /ice in tray it may be a kinked line or something.

[feedfold]

My fan in lower refridgerator stop working so it would not cool or freezer properly, first the freezer stopped making ice. Check your temperatures first.

[fredhardy]

Make sure you have the ice maker button in the on position.
Make sure the water valve in the on/open position. .
Then, if you have an in fridge filter, try taking it out. Empty what ever remains in the ice tray and reinsert it, and see if that helps. Sometimes the system is “over-filtered” (read as creating very low pressure) and the water only fills the tray half way. These cubes get stuck in the system as they get expelled and stop any new ice from being created.
Best of luck,
Fred

[Dijoeboss]

[fredhardy]

Glad you figured it out!

[Dijoeboss]

I have ICE! [emoji51][emoji51][emoji51][emoji41][emoji41][emoji41]