|
|
06-29-2013, 11:22 AM
|
#1
|
Senior Member
Join Date: Nov 2011
Posts: 270
|
Changing the oil on the Berkshire 390bh.
I'm about to head over to the motorhome to change the oil. I've changed the oil on all of my other vehicles but this is my first diesel.
I have: a 5 gallon bucket to drain the oil into
4 gallons of 15w40 diesel oil
Lucas oil additive suggested by mechanic
appropriate oil filter
I will: drain the oil from the crankcase with ratchet extention
remove the oil filter and replace with filter filled with oil
replace drain plug
refill with oil and additive
pray that the last guy to change the oil didn't over tighten the filter
Have I forgotten anything?
|
|
|
06-29-2013, 02:41 PM
|
#2
|
Senior Member
Join Date: Apr 2008
Location: Long Island (Nassau County), NY
Posts: 4,352
|
No- seems like you have everything covered and should be good to go. Do you know when the fuel filter and water separator were changed? You might want to consider those as well.
__________________
Tom and Margaret
2014 Berkshire 390bh-60
|
|
|
06-29-2013, 06:12 PM
|
#3
|
Senior Member
Join Date: Jul 2012
Location: Mechanicsburg - PA
Posts: 516
|
Quote:
Originally Posted by tmmar
No- seems like you have everything covered and should be good to go. Do you know when the fuel filter and water separator were changed? You might want to consider those as well.
|
X2
For the price of filters it is best to change them when changing the oil.
__________________
Earl
2013 Berkshire 390BH / 360hp
|
|
|
06-29-2013, 07:12 PM
|
#4
|
Senior Member
Join Date: Nov 2012
Location: Home is where I park it
Posts: 1,503
|
Quote:
Originally Posted by kingwood390bh
I'm about to head over to the motorhome to change the oil. I've changed the oil on all of my other vehicles but this is my first diesel.
I have: a 5 gallon bucket to drain the oil into
4 gallons of 15w40 diesel oil
Lucas oil additive suggested by mechanic
appropriate oil filter
I will: drain the oil from the crankcase with ratchet extention
remove the oil filter and replace with filter filled with oil
replace drain plug
refill with oil and additive
pray that the last guy to change the oil didn't over tighten the filter
Have I forgotten anything?
|
How are you going to raise it up?? DO NO use the leveling jacks, not matter what you do.
Boowho??
|
|
|
06-29-2013, 07:34 PM
|
#5
|
Senior Member
Join Date: Nov 2011
Posts: 270
|
I got up underneath the coach(in 104 degree heat) and found the quarters very close. How could I raise the coach without the jacks? I may have to pay someone. Thanks
Will
|
|
|
06-29-2013, 08:57 PM
|
#6
|
Senior Member
Join Date: Sep 2012
Posts: 188
|
A 5 gallon bucket won't fit under the pan, and if you cut it it won't hold enough oil. I use a plastic 45 gallon drum cut to fit under there. Then you're good.
__________________
James
2008 Berkshire 360QS-40
"If you can't fix it with a hammer, you have an electrical problem"
|
|
|
06-29-2013, 09:14 PM
|
#7
|
Senior Member
Join Date: Nov 2012
Location: Home is where I park it
Posts: 1,503
|
Quote:
Originally Posted by kingwood390bh
I got up underneath the coach(in 104 degree heat) and found the quarters very close. How could I raise the coach without the jacks? I may have to pay someone. Thanks
Will
|
I guess you could buy some VERY HEAVY DUTY jack stands. Raise the coach enough using the built in jacks, then place the jack stands under the rear axle then gently lower the coach enough so that some of the weight is on the stands. Of course, you would HAVE to be on a VERY solid surface.
The jack stands (I would GUESS) should be capable of at least 12K lbs EACH. Your coach probably carries 17500+ lbs weight on the back axle.
Kingwood, do NOT take my advice as gospel. I am NOT an expert. And I am in no way telling/advising you to do this. (disclaimer)
But by doing it as mentioned above, you have one system (the jacks) "back stopping" the other (the jack stands) and vice versa. And would PROBABLY be safe.
The built in jacks CAN and HAVE collapsed SUDDENLY and VIOLENTLY. Mine did so one night and was so loud all the neighbors came running outside to see what had happened. Had I been under the unit, I wouldn't be typing this.
In my opinion, changing one's own oil is highly desirable. Just be VERY, VERY, VERY, VERY careful. You (and anyone for that matter) that crawls under a raised coach that is not PROPERLY supported, is begging for a disaster.
Good Luck!!!!!!!!!
Boowho??
|
|
|
06-29-2013, 09:16 PM
|
#8
|
Senior Member
Join Date: Apr 2012
Location: West Michigan/Fort Myers
Posts: 3,927
|
I have not done this but my plan was to use the jacks to raise the MH and then put jack stands on the frame to be the safety. I don't see anything wrong with that but would like to hear
Why that is not safe. I plan to change the oil this fall and that is the only way I have to do it.
|
|
|
06-29-2013, 09:31 PM
|
#9
|
Senior Member
Join Date: Feb 2013
Location: Tennessee
Posts: 700
|
I changed my oil last month and just left it inflated on the air bags. Needless to say I didn't spent any time under the oil pan. It was tight but I have a pan for changing transmission fluid which will hold 5 gallons of fluid and is very low profile. Worked great. I did have to purchase a set of strap wrenches from Oreilly's. They have come in real handy for a number of uses.
__________________
edgewant
2013 Berkshire 390RB-60
toad - 2002 Jeep Wrangler Sport
|
|
|
06-29-2013, 09:32 PM
|
#10
|
Senior Member
Join Date: Jun 2011
Location: On Another Adventure
Posts: 2,563
|
Will a five gallon bucket hold all the old oil???? That's good for 20 guarts... Don't they hold 30 or more guarts??
|
|
|
06-29-2013, 10:32 PM
|
#11
|
Senior Member
Join Date: Sep 2012
Posts: 188
|
Quote:
Originally Posted by ernest917
Will a five gallon bucket hold all the old oil???? That's good for 20 guarts... Don't they hold 30 or more guarts??
|
I believe that the coaches hold nearly 17 liters of oil. So technically yes a 5 gallon bucket will hold it all but it won't fit under the pan. So you need a low profile drain bucket.
On another note you can buy heavy duty truck ramps if you want to be completely safe. I do sort of what edgewant does. Inflate the bags, crawl under. There is enough room to get you under, or I have a low spot in my driveway when I want to get under to inspect something. Filling to the filler hole can be tricky, but a pail pump, easiest cleanest way to do it.
__________________
James
2008 Berkshire 360QS-40
"If you can't fix it with a hammer, you have an electrical problem"
|
|
|
06-29-2013, 10:46 PM
|
#12
|
Senior Member
Join Date: Nov 2012
Location: Home is where I park it
Posts: 1,503
|
Quote:
Originally Posted by speedmerchant
I believe that the coaches hold nearly 17 liters of oil. So technically yes a 5 gallon bucket will hold it all but it won't fit under the pan. So you need a low profile drain bucket.
On another note you can buy heavy duty truck ramps if you want to be completely safe. I do sort of what edgewant does. Inflate the bags, crawl under. There is enough room to get you under, or I have a low spot in my driveway when I want to get under to inspect something. Filling to the filler hole can be tricky, but a pail pump, easiest cleanest way to do it.
|
My 340 HP takes 19 qts. I imagine the 360 HP would be the same.
Boowho??
|
|
|
06-29-2013, 11:00 PM
|
#13
|
Senior Member
Join Date: Sep 2012
Posts: 188
|
Quote:
Originally Posted by boowho
My 340 HP takes 19 qts. I imagine the 360 HP would be the same.
Boowho??
|
ok so I was out by a litre (19qt is just under 18 litres).....lol! was last fall when I changed it, just filled from the pail till it was full on dipstick, ran engine to make sure filter was full then filled it to mark again, had some left over in pail.
__________________
James
2008 Berkshire 360QS-40
"If you can't fix it with a hammer, you have an electrical problem"
|
|
|
06-30-2013, 12:12 AM
|
#14
|
Senior Member
Join Date: Nov 2011
Posts: 270
|
I didn't realize how impractical the 5 gallon bucket was. I will look for a low profile 5 gallon drain bucket. I think that inflating the airbags will be a safe way to get enough room to work with. I got under the coach, it was tight, with the bags deflated. Thanks for all the input.
Will
|
|
|
06-30-2013, 06:46 AM
|
#15
|
Senior Member
Join Date: Jul 2012
Location: Mechanicsburg - PA
Posts: 516
|
I'm not sure if there are any Speedco's near your location, but they changed the oil in my coach along with the fuel filters, lubed the chassis, checked the fluid levels in the rear and trans, aired the tires to my spec for $218.00. All while I watched...
__________________
Earl
2013 Berkshire 390BH / 360hp
|
|
|
06-30-2013, 09:04 AM
|
#16
|
Senior Member
Join Date: Nov 2012
Location: Home is where I park it
Posts: 1,503
|
Quote:
Originally Posted by speedmerchant
ok so I was out by a litre (19qt is just under 18 litres).....lol! was last fall when I changed it, just filled from the pail till it was full on dipstick, ran engine to make sure filter was full then filled it to mark again, had some left over in pail.
|
Actually, James, I believe our engines can be fitted (by Cummins) with two different oil pans a 15 or a 19 QT. Why they do this and what the difference is I have no idea.
I think I read in my owners manual that the only way to know for sure, was to crawl under an look or drain the old oil and just keep pouring the new in until is shows full on the dipstick.
Wasn't trying to be anal!!! (and still ain't)
Boowho??
|
|
|
06-30-2013, 09:12 AM
|
#17
|
Senior Member
Join Date: Nov 2012
Location: Home is where I park it
Posts: 1,503
|
Quote:
Originally Posted by EJM4
I'm not sure if there are any Speedco's near your location, but they changed the oil in my coach along with the fuel filters, lubed the chassis, checked the fluid levels in the rear and trans, aired the tires to my spec for $218.00. All while I watched...
|
If they let you watch that is a heluva deal. I'd gladly pay that amount. Freightliner of Arizona did mine for about $236, but I have no idea if they did everything properly. For example, did they grease it?? I got a detailed itemization of what they did, but it was all Greek to me.
When I mentioned I wanted the "initial" 6000 mile service, they looked at me with a dear-in-the-headlights expression. Does not install confidence, does it??
Boowho??
|
|
|
06-30-2013, 11:39 AM
|
#18
|
Senior Member
Join Date: Nov 2011
Posts: 270
|
My DIY nature says "change the oil yourself", but if I had a guy like Earl's close by I'd jump on it! I'm going to check Speedcos website for North Houston affiliates. I haven't found a reliable, reasonably priced local shop yet. As for the fuel filter, I'm staring at one in my study right now. I'll start another thread when I get to that.
Will
|
|
|
06-30-2013, 12:03 PM
|
#19
|
Senior Member
Join Date: Nov 2011
Posts: 270
|
Speedco is in the Houston area. Unfortunately, its about 40 miles away from the house.
|
|
|
06-30-2013, 12:17 PM
|
#20
|
Senior Member
Join Date: Dec 2011
Posts: 3,570
|
Quote:
Originally Posted by boowho
If they let you watch that is a heluva deal. I'd gladly pay that amount. Freightliner of Arizona did mine for about $236, but I have no idea if they did everything properly. For example, did they grease it?? I got a detailed itemization of what they did, but it was all Greek to me.
When I mentioned I wanted the "initial" 6000 mile service, they looked at me with a dear-in-the-headlights expression. Does not install confidence, does it??
Boowho??
|
Not surprised, most Disel mechs service in hours?
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|