Genesis 2.0/ Konka TV low volume fix (Again)

[Henboy]

I read with interest Bryan2503S' post regarding lack of volume from the Konka TV.

I purchased a RCA cable as suggested previously, and when attempting to install it discovered that it was pre-wired from the factory.

After a frustrating 30 minutes I figured out that TV volume could be sourced thru the Genesis 2.0 "AV1" setting, and adjusted via the 2.0 remote.

I now get sound from one ceiling speaker (A, B or C). Is the way it is intended to work? TV volume, such as it is, still works independently from the 2.0

At least we can finally hear the TV, if only from one ceiling speaker!!