Refer Problem

[Burnking]

My son is having problems with the refer in my old TT.

It is a Norcold 3-way. It works fine on 12v and 110v. When operated on propane; it will get to 14 F at night but then warms up during the day to the 40's. Temps here in N. Calif. are only in the low 80's. TT is stored at his house but is in the shade.

He has checked the orifice, cleaned the flue and has the gas pressure set at 11" at the burner.

He is open to any ideas.

Thanks

[myxkp]

Originally Posted by Burnking

My son is having problems with the refer in my old TT.

It is a Norcold 3-way. It works fine on 12v and 110v. When operated on propane; it will get to 14 F at night but then warms up during the day to the 40's. Temps here in N. Calif. are only in the low 80's. TT is stored at his house but is in the shade.

He has checked the orifice, cleaned the flue and has the gas pressure set at 11" at the burner.

He is open to any ideas.

Thanks

How about the outdoor coil?
Sounds like it's not getting enough free air draft.

[Burnking]

The Refer has a circulation fan which he used. He has replaced the burner and it appears to have improved cooling significantly.

Thanks for the reply.