I have a 2006 34’ Georgetown class A that just started having a new issue. On the panel when the tank levels are all indicated, you bring the slides in and out, and where you turn in the water pump and the water heater is all of the level indicators went to empty suddenly. They now will not show how full they are (not that all of them were accurate but some were). When you push the button on each tank a light comes on showing it’s empty which I know is not accurate. The slides still work and so does the water heater and water pump.
This is not a battery drain, you have a voltage connectivity issue. There should be a thread on the forum to be able to trace this down. Could be very easy.... or, they may never work again. Anything that interrupts the voltage can be an issue.
Agree with Brother Les. Your like me probably and want things to work, but my tank sensors always read 3/4 to full even when their empty. So I'm torn, but I would still fix it.
Linear Mode
