Tv mount. Need other 1/2....

[Lawrosa]

Bought a used RV. TV mount here and in bedroom. Cant find on line this model. I need the tv back part. Dont know what all the bolts putruding out are..

Lookes like no tilt feature. Should I cut my looses and get new mounts?

[Chabbie1]

Our Rockwood 2440BS came with a TV in our bedroom with an articulation arm and this same bracket . Those bolts help put the TV in travel mode so it doesn't move while in transit. We also have a bracket on the outside of our 5th wheel so we can quick disconnect the bedroom tv and hang it on the outside of the trailer. Here is a link:https://www.amazon.com/MSCSL12-QD-Wa...XVWQTKG14FP49W
or you can search Ramco Engineering quick connect tv mount

[Lawrosa]

Originally Posted by Chabbie1

Our Rockwood 2440BS came with a TV in our bedroom with an articulation arm and this same bracket . Those bolts help put the TV in travel mode so it doesn't move while in transit. We also have a bracket on the outside of our 5th wheel so we can quick disconnect the bedroom tv and hang it on the outside of the trailer. Here is a link:https://www.amazon.com/MSCSL12-QD-Wa...XVWQTKG14FP49W
or you can search Ramco Engineering quick connect tv mount

Yes I have one in the bedroom looks like this. But does not have the pull string. It snaps in kind off when pushed into a c clip.

But if I remove that arm and try to put it in the other one this long screws get in the way. Plus there is no tilt feature on it too.

https://shop.ramco-eng.com/collectio...oducts/msslq22

[Chabbie1]

Originally Posted by Lawrosa

Yes I have one in the bedroom looks like this. But does not have the pull string. It snaps in kind off when pushed into a c clip.

But if I remove that arm and try to put it in the other one this long screws get in the way. Plus there is no tilt feature on it too.

https://shop.ramco-eng.com/collectio...oducts/msslq22

Your mount looks different than ours.Not sure what the pull string is for. We don't have that on ours.

[Oaklevel]

Originally Posted by Chabbie1

Your mount looks different than ours. Not sure what the pull string is for. We don't have that on ours.

The pull strap is to release it from staying against the wall (and bolts that stick out on yours) after travel..

Look further of Ramcos site


https://shop.ramco-eng.com/collections/moview-mounts

[dave1650]

Originally Posted by Lawrosa

Bought a used RV. TV mount here and in bedroom. Cant find on line this model. I need the tv back part. Dont know what all the bolts putruding out are..

Lookes like no tilt feature. Should I cut my looses and get new mounts?

If you need the tilt feature replacing it may be the best idea. You may not be able to buy just the part you need and even if you could it may cost as much as a new mount. If you plan on leaving the TV on the mount when traveling be sure to get one that will lock the arm swivel and tilt.