Hello! I am new to the forums and have been a Rockwood 2306 owner for several years. We have purchased a Roo 25RS from RVDirect and I want to purchase a new WD hitch before I pick it up in a month or so. I am looking at the Andersen No Sway hitch and it comes with two different sized brackets, 3-4" and 4 3/8" brackets. What size do I need to get for the 2013 Roo frame?
No problem! I know we weren't sure about the 4 or 6 inch drop so we called FR and they gave us the height of the tongue. If you need exact measurements give them a call, they were really helpful.
As long as as TV is original not lifted the 4" drop/riser is enough along with the 5" to 6"for the TT good luck mine just came in today will let everyone know just how good or bad this is still very new product
FWIW I was talking about the brackets that attach to the frame rail of the trailer. if the 3350 is the exact one you got it would indicate the 5 to 6 inch brackets worked for you. If not then I still need to know what size brackets are right for the 25RS. Wish a dealer around here had one to try.
I plan to also send an email to RVDirect since FR says to ask questions through the dealer...FR does not even list a contact email. :\
gregg rollins is the contact person for the Roo line.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
That is the exact one we have. Do you have a Roo brochure with all the floor plans and options? It has a number to the factory on the back. If you call that they should give you the exact measurement.
Linear Mode
