Towed Vehicle lights

[tnmcleod]

I have a 202 Sunseeker 2030DS. I am towing a 2003 Subaru with incandescent lighting. The lights on the Subaru will not operate when connected to the factory lighting connector. I purchased an auxiliary lighting system using LEDs and the parks work. the brakes do not, and the turn signals will flash 3 times and stop. Any ideas would be helpful.

Thanks,

Tom

[upflying]

Does your wiring kit have diodes like this one?
Separate brake and turn signals on your Subaru with combined turn and brake on your MH could be the problem.

https://www.etrailer.com/p-154-792-118158.html

[tnmcleod]

Previously installed and worked well for a number of years om another MH.
Is there any requirement for a heavier duty flasher and where is it located.

[BehindBars]

Originally Posted by tnmcleod

I have a 202 Sunseeker 2030DS. I am towing a 2003 Subaru with incandescent lighting. The lights on the Subaru will not operate when connected to the factory lighting connector. I purchased an auxiliary lighting system using LEDs and the parks work. the brakes do not, and the turn signals will flash 3 times and stop. Any ideas would be helpful.

Thanks,

Tom

I'm not familiar with a Sunseeker 2030DS. What truck chassis is it built on?

[tnmcleod]

It is a standard Ford E450 chassis.