I looked at GM UPFITTERS.com and found fuse 11 (engine bay passenger sida) connected to a 30 amp that runs to a blunt cut red w/white stripe wire for the 12 volt. Can't find that rascal wire anywhere in the engine bay, traced it up to around the genny then it gets stuffed. I guess will run a new wire from the fuse post back to 7 pin as I do not have a truck lift to really dive into it.
Sure hope someone can tell me where the blunt cut is..... it seems strange to put a fuse (yes, it was good) on a blunt cut line....
Doubt GM Upfitters are wrong.
2013 van electrical manual pages A-69, B-1,B-2..
Hoglou the DH & BK the DW (retired and happy)
WestGA KM4HQQ 146.640mhz
L'IL Foot" 2014 Sunseeker 2300
"Harry" the JK toad in the mirror
Check out the "mods" in the albums