No cable on 3 tv’s

[scotte303]

All,
2023 Sunseeker 3010
I cannot get cable on any of my TV’s. I never used cable before.

1.Connected coax cable
2.turned off antennae booster.
3 set tv to cable and ran scans
I get the message over and over to auto scan channels.

When I turn the antenna on and scan over the air, I get 50 channels.
I have tried to find the splitters but not successful.
Any help is appreciated.

[coop44]

Have the place check to see if the signal at the cable box is good.

[Chaplain Kent]

I will be following this thread since I have the same problem. I even tried to hook up an antenna to the coax connector for the cable and got no reception. I know that coax cable connectors will come loose over time and would love to know where the cable coax connects.

[BrandonSmith]

Are there separate 'satellite' and 'cable' inputs on the rig? Have you tried hooking coax to each?

[scotte303]

SOLVED!!!
Turns out the RV and the operator were all good. The campgrounds cable didn’t work!!
Thanks to all that answered! Safe travels!

[Chaplain Kent]

Originally Posted by BrandonSmith

Are there separate 'satellite' and 'cable' inputs on the rig? Have you tried hooking coax to each?

Yes, there are three coax connections, two by the televisions and one in a back storage compartment. The one in the storage compartment does not work.

[Iwritecode]

Originally Posted by Chaplain Kent

Yes, there are three coax connections, two by the televisions and one in a back storage compartment. The one in the storage compartment does not work.

If you're having an issue you may want to start a new thread since the OP of this thread has solved theirs.

It will get confusing if people start responding to both problems at the same time.

[brucemc]

Good thing you didn't run into the issue I had!


The assemblers cut the cable...

[billcrews81]

that was an Easy fix but, i have found bad Splitters in mine and they are no joy to fish out of the holes to replace.