2014 F53 rear shock bolt

[M3maximation]

I found a missing bolt on my 2014 Georgetown (22k chassis).

Does anyone know the part number for the lower shock absorber bolt and nut?

Much Appreciated if anyone has a lead on this.

Thanks!

[JoePK]

Hello, I would give a store like this a call to verify the right part number: https://www.fordpartscatalog.com/ Then with the right part number you can shop around for the best deal.
Hope this helps...

[Carmel]

I’d take the opposite one out and take that to a good hardware store for a grade 8 replacement bolt.

[realshelby]

I too would just remove the bolt from the other shock. Get a Grade 8 replacement in the correct length. You will likely only find a shoulder bolt in that length ( threads don't go all the way to the head) but that is what you want anyway. The factory nuts might be the locking type where the threads are pinched on the end to make them harder to back off. Hard to find that exact nut in hardware stores, but a proper high quality nut installed and torqued with some blue standard strength loctite would never leave me worrying about it again.