Good question
Here are some pics of that installation. On the right sides I ran it down behind the fireplace, through the floor, over to the PVC pipe, along the PVC pipe, into the belly of the coach to the other side. I loosely zip tied it to the piston rod. Then I drilled a small hole in the 2 x 2 slideout tube (so as not to pinch the wire) to the outer wall and along the edge then straight up behind the recliner, that is where the subwoofer is at then the rear speaker wires under the coach then up the wall.
It took me longer to figure out how to do it than to accomplish the job.
Sent from my iPad using Forest River Forums