Rear wheel nut tightening torque on Georgetown 338

[Pasque]

Hi,

Can someone give me the Rear wheel nut tightening torque on Georgetown 338. This is 19.5 wheel (double wheel on the same thightening)
I'm in France and don't have the original user manual with the motorhome.

After blowing and replacing the tire I need to properly tighten the rear wheel coupling.

Thank you very much for your attention and your help.

Regards

Pascal

[NXR]

Do you have the Ford F53 chassis or the Chevrolet Workhorse chassis? I don't know when the Workhorse was an option on the Georgetown but it was before 2010.

I see from your profile you have a 2005 model year Georgetown. Those can have a 2004 or 2005 model year chassis. If you have the Ford F53 the Owners Manual for the 2004 chassis is here: https://www.fordservicecontent.com/F.../04motog1e.pdf

On page 51 it shows the lug nut torques, which are still the same for the current model year F53 chassis: 150 ft lbs for the 19.5" wheels and 450 ft lbs for the 22.5" wheels.

Pic attached.

If you have the Chevrolet Workhorse chassis please give the exact model, usually a "W" or a "P" followed by a number.

Ray

[Pasque]

@NXR
Thank you very much for your precise answer.

I have the F53 chassis with V10 Ford triton engine.

Pascal