Hello all. New to the forum. We recently purchased a 2017 Vibe 268RKS. We’ve had it out a couple of times with no issues. When getting ready to set up this weekend I noticed the slide will not work with the remote. Works fine with the switch on the wall. I do hear a solenoid click but no movement. All other remote functions work. Any ideas? Not a big deal but it bugs me when something doesn’t work as it should. Thanks in advance. I’ve learned a lot on this forum as previous owner didn’t know much. Probably why he sold it after a year and 2 short trips.
I’ve had this too when it’s not connected to 120v, the fuses don’t blow on the 2018s but a relay foes shut it down, I’ve had it twice, fuses were fine. If your stats are a little low it causes an overload.
Thanks for the advice I finally had time to look for this fuse. It was in a separate fuse panel behind a lower panel in the bathroom linen closet. Fuse fixed the problem.
Mine blows every time I let the slides in if I hold the remote too long. I usually let the slides almost all the way in and stop just before the stop and finish the retraction with the hard wired switches.
Linear Mode
