Our WJ is three months old. Just completed 30 day trip. All is well except... we slept downhill the whole time. The bedroom slide out is not level. The dealer has made some adjustment but by doing so the graphics and belt line are off considerably. The top of the slide when out has a big gap at the top. When the slide is brought in it moves side to side and then raise before finally locking down. There does not appear to be a good solution. Has anyone experienced this issue?
We have had our 3029w for 10 months and have not had any problems with any of the slides. Sounds like an issue that may need to go back to the factory.
Linear Mode
