2014 XLR 27 slide wiring

[Berjr1]

This weekend i was looking at the wiring for the slide out on our 27hfs. it has a plastic backer zip tied to it, while it has been loose and dangling since we got it we thought it was normal until looked up under the slide where it attaches , it has a pivot on 1 side but the other side appears it maybe should of been attached to the slide portion and ours is not. it is broken right off at the slide side connection. hence the dangle, Question is where can i get a new plastic backer to replace it?

[WolfWhistle]

that happened to me. All I did was to reattch the slide end with 4 screws and a piece of aluminum angle; after thousands if miles its still hanging in there.

[Berjr1]

Originally Posted by WolfWhistle

that happened to me. All I did was to reattch the slide end with 4 screws and a piece of aluminum angle; after thousands if miles its still hanging in there.

Thank you, I did the same thing last night myself, I think mine was missing about 2" but after checking with the slide all the way out i felt it didn't matter if it was shorter by a bit

thank you