Haven't done one of those, but have done several. If it looks as though the tank is sitting between two frame cross members, it is, in a way. Usually the rear one is removable. Look up at the frame, inside, and up on the vertical part for the bolts that hold the cross member in place. Don't forget about water lines, and make and mark your sensor wires, before removing them. You should have a large, 1 inch flexible fill line. A 1/2 inch suction line to the pump. Also a vent line, and maybe a drain to worry about. Helps to have two, even it doesn't weigh much when empty. Good luck, and Welcome
__________________
LadyWindrider
2012 Ford F250 ext. Cab 4x4
2002 Jeep Wrangler Sahara
2008 Yamaha V-Star 650 Classic
2008 Work and Play 18LT
|