Fuel Station switch/relay operation
I have a 2015 XLR Hyperlite 27HFS with the fuel station for my ATV.
When I first got started using the station, the switch on the fuel gauge to start the pump seemed a little sketchy. What I mean is, you flip the switch to activate the pump, but to shut the pump off, it would take several times to get the pump to shut off.
This year, I was rinsing some mud off (with a squirt gun) the outside of the trailer after travelling down a muddy road to our campsite,. When I squirted the door of the switch/fuel gauge, the pump activated and wouldn’t shut off. I shut it off using the master switch inside the trailer. Now the switch will not do anything to start the fuel pump. In order to start the pump, I jumper the switch wires momentarily to start the pump. But, the only way to shut the pump off is to use the master switch inside.
So, now I am wondering how the shut off is supposed to work? Is the switch just supposed to activate the pump relay, which times out after 5 minutes? Or is it supposed to be able to shut it off as well?
Do I need a new relay module and a switch? Or just a switch?
Any info on how this is supposed to operate would be appreciated.
Thanks
|