Slide problem?
This is a 2012 XLR 27. I just noticed that the slide when closed is about a quarter inch low. I got on the latter and watched it come out, and after a couple inches it raised back up an d the sweep was even on both sides all the way out. Going back in it was level to about that same 2inches and then it dropped a little. At this point the sweep was not making contact with about the last 6 inches of the slide. It does line up with the seal clear across the slide. Do I have the makings of a problem or is this common? It's my second season with the toy hauler, and I can't say that it hasn't been like this all along.
|