tracer ultra lite touring edition 2014 slide out not moving

[jasonbungay]

Hi

The slides on the my tracer wont move. I have check the fuses and they seem okay. I was willing to do it manually but can't find the manual override. Does anyone know where it is on the Primetime 2014 Tracer 3200 bhd

[Bama Rambler]

There are fuses in a couple of places, have you checked the remote receiver and near the battery and motors?

Which model slide outs do you have? Underfloor or Schwintek (racks on the sides)?

[jasonbungay]

Thanks. I believe its a Schwintek (two racks on the side), but i can find the control switch anyway.

[bikendan]

Originally Posted by jasonbungay

Thanks. I believe its a Schwintek (two racks on the side), but i can find the control switch anyway.

Have you tried contacting PrimeTime? They always been helpful for me.

[Bama Rambler]

Unfortunately there is no manual operation for Schwintek slides. There's an override that will allow you to run the motors if they're not bad, and have power to them.

You need to find the controller and see if there are any error codes being flashed.

[rracer5]

Originally Posted by Bama Rambler

Unfortunately there is no manual operation for Schwintek slides. There's an override that will allow you to run the motors if they're not bad, and have power to them.

You need to find the controller and see if there are any error codes being flashed.

X2 Controllers are probably in a cabinet or behind a false wall. But, if none of your slides move, I'd be looking for a resettable breaker.

[rploeg]

I have this exact make and model. If your having trouble with your large slide not moving but you can hear the motor run there is a driveshaft ( 1" long ) mounted on the top inside wall of the slide in the middle that has a tendency to shred that may need to be replaced.