2019 2507s kitchen sink came unglued

[Bklogistic]

Anyone had their sink come un glued? Hope it’s covered by warranty

[SeaDog]

Welcome to the forum its a great place to get your questions answered. Covered under warranty depends on when you bought your rig. Most have a one year warranty.

[babock]

Join the Rockwood sink falling out club.

Personally, I would top mount it the way the sink was designed to do in the first place otherwise, you will have to make or buy under counter sink supports.

Originally Posted by Bklogistic

Anyone had their sink come un glued? Hope it’s covered by warranty

[Bklogistic]

Is there a kit to adapt to a top mount?

[babock]

No. You just put it in from the top.

Originally Posted by Bklogistic

Is there a kit to adapt to a top mount?

[ES_FR]

Bklogistic,

Thank you for being a part of the Rockwood family.

Please accept our sincerest apologies for any inconveniences that you have experienced with your new Rockwood Mini Lite. Your satisfaction is very important to us; accordingly, we invite you to contact Rayna Dimitroff in our Customer service department through the following personalized and direct link: http://www.forestriverinc.com/Direct...20827046029665.

This direct link is provided for your convenience in order that we may resolve your concerns as quickly as possible. We will strive to respond to you within 24 hours of receiving your correspondence.

Respectfully,
Forest River

[PapaSmurf587]

Glued, really? On an appliance that holds the weight of water, dishes, scrubbing, not to mention bouncing down our fine highways. With this design l'm surprised every one of them hasn't fallen down. With the stress on the drain pipes, they now leak.

[cboss]

We had ours come unglued last year. We have 18000 miles on our camper. It came unglued around 8000 miles. I used Liquid Nails to glue it back in, then sealed the edges with silicone. We've had no problems since. I did not want to top mount it as we would lose the sink cover.

[jimsheila1996]

Hi,
We just repaired our 2019 2507S sink with Gorilla Glue HD construction ahesive (their version of liquid nails) as seen in this YouTube vid: https://youtu.be/w8VAwwdpKpE .

I wanted to find a better way to "clamp" the sink to the counter and came up with the "tool" shown in the pics. It's 8-32 threaded rod, some wing nuts and washers. You invert the bottom wing nuts to use as hooks to grab the drain seat (I had to use a utility knife to shave a bit of plastic from the drain so the nut would go down through ( could file down the nut too). Used a 3ft piece of angle I had to span the sink from above, your could use a 2x4 with holes drilled for the rod. Then put a bead of the glue around and tightened the top nuts while keeping the sink centered. Glue dried 24 hrs. Seems to be the ticket. FWIW.

[Mathews2]

Just today, I spent
The morning in my 2018 Rockwood wet vacuuming the water up after my sink completely fell from under the counter.
I repaired with 5/8" wood screws, aluminum angle, drilled the Angle for the screws. Used the angle to clamp the sink to underneath the counter.
Who uses only a thin line of glue to mount an under counter sink!!!
Disappointing in a unit of this caliber.