New GeoPro - Kinked/Leaky Hose (Kitchen Slide/Sink)

[btdz888]

Afternoon all!

A few weeks ago we picked up a 2020 Rockwood Geo Pro G19QB with a kitchen slide. I noticed when we took delivery that there was a small kink at the floor connection where the nylon hose meets the pex and was assured by the service guy doing our delivery that it was nothing to be concerned about.

Last weekend when we were packing up to leave we noticed a few tablespoons worth of water on the floor and it appeared to be coming from the connection that I have included a picture of along with the kink I saw.

My question is - will I damage anything by tightening the connection to see if that helps? Given the kink, should I just replace the hose, and get a new connector or what would my first couple of steps troubleshooting/fixing this be? I'd rather not pull it all the way back to the dealer (About 90 mins each way) for something I would guess is pretty simple but would like to have it fixed before we take off for our next weekend here in a few days.

Tried searching but couldn't find anything that was of much help, thank you so much!!

Edit - I should also mention that our water pressure on the cold side was similar to the hot at the sink, kink did not appear to affect anything there.