Well got the rig ready for winter and the water heater anode was pretty bad so instead of putting a new anode in I just bought a pvc plug from hardware store and sprayed some fluid film on the outer threads - should make spring clean out and new anode install easier.
Sent from my iPhone using Forest River Forums
__________________
Walter & Donna
2011 CC LB RAM 3500 CTD 6.7L DRW
2013 Cedar Creek 38FL
2017 Days Planned: 135
The Atwood I have has a plastic plug that I use pipe tape on, works fine.
I just thread it in by hand to keep the bugs out.
__________________
2016 F350 6.7L LB CC Reese 28K 2014 Chaparral Lite 266sab
"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety." 2014 19 days camping 2015 17 days camping201620 days camping
We have to have the anode in for operation, but seems as the anode gets pretty rusted in leaving it all winter and summer. Thinking this will help for the long run using the pvc for winter. At least till we move to a warmer climate.
__________________
Walter & Donna
2011 CC LB RAM 3500 CTD 6.7L DRW
2013 Cedar Creek 38FL
2017 Days Planned: 135
Linear Mode
