Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
Old 09-06-2010, 07:59 PM   #1
Junior Member
 
Join Date: Sep 2010
Posts: 1
Winterizing a park model

Hi all,

I am planning to winterize my park model Mallard trailer by blowing out the plumbing with a compressor. I have found some good info on the subject already but I am hoping someone can clarify the issue of bypassing my water heater (WH).

I am pretty sure my unit does not have valves to bypass the WH. Also I am not going to use antifreeze in the process. I will just add it to p-traps and toilet.

So hear is my question:

Since I don't have a by pass, should I just put the plug back in place and blow out my lines from the city water inlet?

Logic tells me yes but I need to be sure that I am not missing anything.

Thanks

JT
giannit is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.



All times are GMT -5. The time now is 07:44 PM.