Inverter Errror Code

[rjassey]

My inverter provides power for a minute or so then stops and there is an error code of E09. I can't seem to find a list of error codes anywhere. The inverter is a WFCO WF-5110HD. Thx for any all suggestions.

[Bama Rambler]

E09 on the 5110 is Output Overload.
To clear the error,

Push the front panel ON/OFF Power Pushbutton to the OFF position. Because the
inverter has a rear panel mounted circuit breaker, the output AC wires at the rear
panel will have to be safely removed. Remove the Negative (White) wire from the DC
input blocks on the rear panel. Wait approximately 10 minutes then reconnect the
Negative wire to the DC block. Turn the inverter ON. If the E05 code disappears,
reconnect the output AC wires

P.S. Welcome to FRF

[rjassey]

Thx so much for the reply. Will try first thing in the morning! Roll Tide!

Originally Posted by Bama Rambler

E09 on the 5110 is Output Overload.
To clear the error,


P.S. Welcome to FRF