Noticed the locking ring on my 50 amp camper plug has a crack. This is the original molded cord that came with the camper. Is there a way to replace just the ring or am I up the creek and have to install a new plug and boot? Thoughts?
I had the same issue with a Furrion shore cord on a past camper. They sent me both a plastic AND metal lock ring for free. I just called and nicely asked if they could help me.
ordered a metal replacement one from furrion and it works great.
How do you get it on? Does it fit over the other end of the cord? If it does, I would probably put it on backwards on my first try..
__________________
Al
I am starting to think, that I will never be old enough--------to know better.
Tolerance will reach such a level that intelligent people will be banned from thinking so as not to offend the imbeciles. Fyodor Mikhailovich Dostoevsky, Russian Novelist
S.E. Mich. Flagstaff 26FKWS / 2022 F-150 3.5 EcoBoost SCrew Propride
it takes a bit of an effort to get it on. if i remember the real problem was holding the cord steady so you could line up the new ring and force it over the end of the cord. i don't remember exactly how i did it. also some dish washing soap applied to the cord end to allow the new rings to glide over it. i think i aligned the ring, put some blocks on it, and then tapped the blocks to get it on.
__________________
2015 cardinal model 3825fl
2015 dodge ram 3500 dually
Linear Mode
