Another where to place the jack thread

[Skip12]

Sorry, I've read many of the 'where to place the jack threads' but it's still not perfectly clear to me.

Is this the right spot? If so, where would a jack stand go? I don't see how there could be enough room for both the jack and jack stand in that little spot.

I'm trying to figure out how to get all 4 tires off at once but think I'll have to remove two at a time, utilizing the spare, so the camper is only missing one at a time.

[Skip12]

I decided to just pull off one wheel at a time. Utilizing the spare, I was able to get two wheels off to replace the tires.

The camper is already on levelers so I didn't need to get the frame up any higher. Just wanted to get the wheels up. I placed a block under the u bolts and lifted from there figuring it would disperse the pressure across the whole assembly and not just the axle.

Reasonable or still risky to the axle?

[Daxinarian]

Originally Posted by Skip12

I decided to just pull off one wheel at a time. Utilizing the spare, I was able to get two wheels off to replace the tires.



The camper is already on levelers so I didn't need to get the frame up any higher. Just wanted to get the wheels up. I placed a block under the u bolts and lifted from there figuring it would disperse the pressure across the whole assembly and not just the axle.



Reasonable or still risky to the axle?

That is where I lift from, I keep it between the two U bolts. I have never figured out how to swap the Jack for a Jack stand.