2019 Sandpiper Furnace Down

[Roberts19]

I have a 2019 Forest River Sandpiper 384QBOK. Last night my furnace stopped working. Blower does NOT turn on. I pulled the fuse for about a minute and tried to restart but nothing happens, no noises at all. I’ve tried accessing unit to check blower but I can’t find a way to access that part of the unit

[SeaDog]

welcome to the forum its a great place to get your questions answered. You need to provide a little information to get a good answer. Have you checked the output of your batteries or the converter. Are you hooked to shore power? Have you tried bypassing the stat to see if the unit will start?

[5picker]

Welcome to the forum, I see it is your 1st post.

As SeaDog mentions, you have to start with the basics.

Checking/pulling the fuse was good but you need to know if voltage is at and and then flowing through that fuse to the furnace.

Do you have a multimeter and know how to use it?
5 minutes with a meter will tell you more than all the guesses we make here.

If you are going to do self diagnostics and repair, you'll need to find a way to access the furnace.

[koller1509]

Originally Posted by Roberts19

I have a 2019 Forest River Sandpiper 384QBOK. Last night my furnace stopped working. Blower does NOT turn on. I pulled the fuse for about a minute and tried to restart but nothing happens, no noises at all. I’ve tried accessing unit to check blower but I can’t find a way to access that part of the unit

I am assuming that you removed the wall in the pass-through compartment to access the furnace??