|
03-20-2018, 08:06 PM
|
#1
|
Junior Member
Join Date: Sep 2016
Posts: 13
|
Awning stabilizer
Hi
i have a Forest River pop up. I would like to have the awning support poles go down to the ground instead of going back to the side of the camper. Would a pair of stabilizers do the trick?
|
|
|
03-20-2018, 08:29 PM
|
#2
|
Senior Member
Join Date: Aug 2014
Location: Northern KY
Posts: 5,725
|
Read this thread from post #2145 on... and you will get an idea on how you can purchase a bracket and either buy or make awning hold down/up poles.
http://www.forestriverforums.com/for...-49765-54.html
I say down/up because in high winds your awning may be pushed down or blown up by the wind.
I personally bought the bracket from Old Coot but made my own poles using 1 1/4 and 1 inch PVC pipe...
Others have used aluminum tubing, painters extension poles or bought them made from another member. Read through that posting and make your own mod for your awning using the thread for ideas....
Make the poles adjustable as it is best to have your awning tilted left to right to help shed water in heavy rains.
Good Luck and post your final solution...
__________________
"nothing can now be believed which is seen in a newspaper. Truth itself becomes suspicious by being put into that polluted vehicle."
Thomas Jefferson to John Norvell pg. 2, June 11, 1807
2014 Shamrock 183
2014 RAM 1500 Bighorn Crew Cab, HEMI, 3.21 gears, 8 Spd, 4X4 TST TPMS
|
|
|
03-21-2018, 07:07 PM
|
#3
|
Junior Member
Join Date: Sep 2016
Posts: 13
|
Awning poles
Hi
Would you happen to have a picture of the finished product? How does the poles attach to awning and do I need ropes to the ground with stakes?
|
|
|
03-21-2018, 10:17 PM
|
#4
|
Senior Member
Join Date: Aug 2014
Location: Northern KY
Posts: 5,725
|
I will help you but as it snowed 3 inches last night/today it will take until next week before I can get a picture as I am leaving Thurs for the weekend.
Basically Old Coot sells a bracket that bolts to the end of the awning arms at each end near the roller. This bracket uses existing holes in awning arms. It gives you the ability to pin a telescoping support pole to the bracket that will extend to the ground. Also on the bracket is another short arm with a hole that you will use to attach a ratchet strap to a ground stake to fasten the awning to the ground. So pole holds awning up and strap holds awning down... between them the awning is stabilized against wind and rain. Best to keep awning tilted from left to right in case of rain and poles slide into one-another to accommodate different lengths.
Now picture some CPVC (white rigid) plastic tubing from Home Depot, 1 inch sliding into larger 1 1/4 inch tube that is pinned to the bracket at top and goes down to the ground. The sliding pole is adjustable in and out and with holes drilled into the tubing at various points that can also be pinned at various lengths to accommodate differing awning heights to the ground. I think post #2145 on the other thread shows this in a picture.
this thread here >>> http://www.forestriverforums.com/for...-49765-54.html
One post in this thread I mentioned above talks about using rigid metal conduit in a similar way as the plastic. Another member here sells aluminum poles already made for this purpose. Up to you to decide how fancy you want to get. CPVC is light to carry and cheap to make. Over all pole length using 10' pipe is about 5 foot 6 inches collapsed.
I will do a write-up with pictures next week and post here on this thread...
__________________
"nothing can now be believed which is seen in a newspaper. Truth itself becomes suspicious by being put into that polluted vehicle."
Thomas Jefferson to John Norvell pg. 2, June 11, 1807
2014 Shamrock 183
2014 RAM 1500 Bighorn Crew Cab, HEMI, 3.21 gears, 8 Spd, 4X4 TST TPMS
|
|
|
03-27-2018, 04:55 PM
|
#6
|
Junior Member
Join Date: Sep 2016
Posts: 13
|
awning poles
Would the adjustable poles that came with my awning be strong enough to support the awning? I believe they are tall enough. Then I was going to use a pair of Camco awning stabilizers. They have a rope that wraps around the awning and then down to small augers.
|
|
|
03-27-2018, 05:15 PM
|
#7
|
Site Team
Join Date: Sep 2014
Location: Northen IL
Posts: 8,334
|
Interesting that your awning arms don't detach from the body of the trailer. I thought this was an option on most pups.
|
|
|
03-29-2018, 10:35 PM
|
#8
|
Senior Member
Join Date: Nov 2011
Location: Kamloops,B.C. Canada
Posts: 170
|
JoeAdkins.
Is your awning an electric or manual awning? If possible could you post a picture of your awning arms and of the bracket at the side of the camper?
Thanks.
__________________
2012 Palomino Ultralite T245
2004 F250 Supercab 5.4L
09 Grizzly 700 EPS
|
|
|
03-30-2018, 10:04 AM
|
#9
|
Junior Member
Join Date: Sep 2016
Posts: 13
|
awning
My awning does detach from the side of the camper. When I detach it and put the poles straight down, there is nothing to hold the poles from falling over. So all I want to know is if I run the poles straight down, can I use awning stabilizers made by Camco to hold the poles in place.
|
|
|
03-30-2018, 10:12 AM
|
#10
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by JoeAdkins
My awning does detach from the side of the camper. When I detach it and put the poles straight down, there is nothing to hold the poles from falling over. So all I want to know is if I run the poles straight down, can I use awning stabilizers made by Camco to hold the poles in place.
|
Pictures would really help us help you.
When the poles are straight down, I think you'd need to tie down the awning in some way. Something like ratchet straps to dog tie downs or something.
__________________
Officially a SOB with a 2022 Jayco Precept 36C
Checkout my site for RVing tips, tricks, and info | Was a Fulltime Family for 5 years, now we're part-timing on long trips
|
|
|
03-30-2018, 10:22 AM
|
#11
|
Senior Member
Join Date: Apr 2016
Location: Port Charlotte Fl/Hinsdale Ma
Posts: 4,823
|
Quote:
Originally Posted by JoeAdkins
My awning does detach from the side of the camper. When I detach it and put the poles straight down, there is nothing to hold the poles from falling over. So all I want to know is if I run the poles straight down, can I use awning stabilizers made by Camco to hold the poles in place.
|
I don't understand Falling over. All standard awnings give you the option if leaving the bottom attached to the trailer or removing them and standing them on the ground. they stay there very well. the will lift in high winds. I bought weights to place around them on the ground. They look like barbell weights with a slot cut out to go around the pole. I never leave mine attached to the trailer. too much ducking to walk around. When RVing Google and Amazon are your friends.
https://www.amazon.com/Quik-Shade-Ca...ts+for+awnings
|
|
|
03-30-2018, 10:28 AM
|
#12
|
Senior Member
Join Date: Jul 2010
Location: Waynesville
Posts: 14,428
|
Quote:
Originally Posted by JoeAdkins
My awning does detach from the side of the camper. When I detach it and put the poles straight down, there is nothing to hold the poles from falling over. So all I want to know is if I run the poles straight down, can I use awning stabilizers made by Camco to hold the poles in place.
|
Easy answer YES! Youroo!!
__________________
|
|
|
03-30-2018, 10:31 AM
|
#13
|
Pickin', Campin', Mason
Join Date: Aug 2015
Location: South Western PA
Posts: 19,149
|
I Googled Camco awning stabilizers and yes they will work.
__________________
2022 Cedar Creek 345IK 5th Wheel•Solar & Inverter•2024 Ford F-Series SCREW•7.3L•4x4•Factory Puck•B&W Companion•TST Tire Monitor w/Repeater•Sinemate 3500w Gen.
F&AM Lodge 358 Somerset, PA - JAFFA Shrine - Altoona, PA
Days Camped ☼ '19=118 ☼ '20=116 ☼ '21=123 ☼ '22=134 ☼ '23=118☼ '24=90
|
|
|
03-30-2018, 01:07 PM
|
#14
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by ependydad
Pictures would really help us help you.
When the poles are straight down, I think you'd need to tie down the awning in some way. Something like ratchet straps to dog tie downs or something.
|
Quote:
Originally Posted by 5picker
I Googled Camco awning stabilizers and yes they will work.
|
Heh, I should have Googled it. They're basically what I said, just with rope and dog tie downs.
__________________
Officially a SOB with a 2022 Jayco Precept 36C
Checkout my site for RVing tips, tricks, and info | Was a Fulltime Family for 5 years, now we're part-timing on long trips
|
|
|
03-30-2018, 02:01 PM
|
#15
|
Senior Member
Join Date: Nov 2015
Posts: 4,223
|
The “dog leash” corkscrew type tie downs are great for dogs but most dogs are pulling sideways, not straight up. I used to use them until I watched the awning pull it right up out of the ground during a thunderstorm. It was set in pretty firm grass. Fortunately I was watching it happen and was able to run out and grab the strap to hold the awning down (sure did get really wet doing that). Camper behind me using the same system had the awning destroyed when it pulled the stakes and flipped over the roof.
Best tie down system is “The Claw”. Best deal now is Amazon
https://www.amazon.com/The-Claw-C101...ie+down+anchor
For poles I used Easy-up picnic canopy support poles. They were free since I salvaged them from the pile of canopies destroyed during the previously mentioned thunderstorm. For rainy times I set one side of the 21 foot awning 8-10 inches low to provide drainage.
Made the brackets from 1.5 inch aluminum U-channel. You can get enough brackets cut from a four foot piece to make eight poles.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
BIRDS AREN’T REAL
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|