2015 Cherokee Limited 274RK Slide issue
I adjusted my slide, today. There was a 2” gap inside at the bottom of the slid, when fully extended. That caused an air leak and prevented my pantry door from opening adequately. After reading all I could on the topic and after a couple attempts to resolve the issue I found another way. There was not enough adjustment left to correct my issue. The vertical adjustment was maxed as well the horizontal bolts only had an inch left. So I moved the drive drive 2”. There are about 8 mounting holes on the frame, it uses two. This corrected the issue. It slides in/out just like it did, Maybe easier now, except the thing now seals inside.
Does anybody think I might have created a new issue (as my research suggested I could) with the adjustment by moving the drive mount?
Thanks for your opinions,