Slides were slow operating and I would notice as I traveled the kitchen slide would creep out. Would stop and bring it back in only to happen again. Problem was caused by a bad piston seal in cylinder for LR slide. Retraction pressure was very slowly leaking through the seal to the extension side and forcing other slides to extend 1-2”. Problem solved when I had cylinder rebuilt. Forgot to mention that cylinder totally failed in extended position Hope this is beneficial to someone
Welcome to the forum its a great place to get your questions answered. Some of the older class A rigs like Winnies had travel latches on the slides to stop that (slides were hydraulic) thanks of the info
__________________
Retired Navy
Jake my sidekick (yellow Lab) 10/04 - 05/20
2017 RAM 2500 CC 4X4 Cummins Diesel
2016 Flagstaff 26 FKWS
AF&AM & El Korah Shrine of Idaho