Forest river microlite slide gap

[sdp1234]

I believe this is good but I want to check The slide gaps a good bit on the bottom but it seems to be tight against the gasket. Does this look normal?

[SeaDog]

The general rule is the slide gasket needs to be compressed at least 50% they are not always even top to bottom. Mine is also out somewhat at the bottom but when the slide is out its straight and tight against the rig.

[sdp1234]

The bottom screw on the slide was stripped. Looks like someone had closed the slide with a stick or something in between the slide and the wall. I removed the screw and pushed everything back together (.5-.75 inches) then installed a screw above and below the one that was striped and pulled out. Now it closes much tighter. Thanks for the help