Jacks not working 2003 325S

[joyrde]

I have a 2003 Georgetown 325S with one slideout. The leveling jacks will not operate, but the slideout works as it should.

I have checked all the wiring both to and from the Leveling Control Panel to the Suppressor. All of which including the Control Panel works as it should. The Cube Relay works when the Slideout is activated. There is power at the Buss Bar by the motor. All the grounds test good.

By process of elimination I believe I need a new Suppressor. Power Gear Manual 82-L0327 (Rev 4), the part number of the Suppressor I need is DN12649.



Does anyone have a clue where I can buy one new or used


Thanks

[johntaves]

I know this is a year old, but I need the same. Did you find one?

When your's failed, what were the symptoms? Did the motor spin without a load and all jacks and slides failed to move?

Thanks

jt

[bikendan]

Originally Posted by johntaves

I know this is a year old, but I need the same. Did you find one?

When your's failed, what were the symptoms? Did the motor spin without a load and all jacks and slides failed to move?

Thanks

jt

The OP has only posted twice, in 2 years. This post was the last one.
You might get quicker response if you sent the OP a PM.