Two slides. One goes out the other doesn't. Checked voltage at control module located under slide, the one that goes out has full 12v the other only 5v. I disconnected the power to the module and jumped 12v to it and it works, however I'm not sure why the original power wire only reads 5v. I can guess i can try and chase that power wire to the panel, I just don't want to create more problems because everything seems delicate and I'm not a professional.
It would help if you posted make and model of RV you have.
It's not listed in your profile.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
Linear Mode
