Level up and slide issue

[BuzzWolfAR]

Brought my Silverback 29ik and put down the Landing gear, pulled the truck away with no issues.

When I hit Autolevel, landing gear retracted, hydraulic motor kept running, no other jacks came down. Got the error red light.

Reset the system and tried again with same result. Tried Manual, nothing and Slides won't work.

I can hear a switch click when I push a button, but nothing else. I assume the motor is out, any suggestions?

There is a white button by the pump motor that I Assume is a circuit breaker. It had no impact on the problems.

[BuzzWolfAR]

Originally Posted by BuzzWolfAR

Brought my Silverback 29ik and put down the Landing gear, pulled the truck away with no issues.

When I hit Autolevel, landing gear retracted, hydraulic motor kept running, no other jacks came down. Got the error red light.

Reset the system and tried again with same result. Tried Manual, nothing and Slides won't work.

I can hear a switch click when I push a button, but nothing else. I assume the motor is out, any suggestions?

There is a white button by the pump motor that I Assume is a circuit breaker. It had no impact on the problems.

Thought a picture might be helpful.

[jjcook]

The white button is suppose to operate your slides . At least it does on my 2017 29RE it will work even if the switch in your control panel inside says the slides are off.

[BuzzWolfAR]

Originally Posted by jjcook

The white button is suppose to operate your slides . At least it does on my 2017 29RE it will work even if the switch in your control panel inside says the slides are off.

Thanks, didn't know that.

[BuzzWolfAR]

Was circuit breakers, at least the slides are our. I suspect won't Autolevel because I can't get the nose low enough. Will try manual again.

[jayr2]

If your pump motor is bad, look for someone to rebuild the motor. If you have to buy a new one get ready to spend some money. $ 800 or more. I know I bought one.

[The Newsoms]

When we had trouble with ours, the battery was low. I could level manually but not auto.

[Scheinin]

On my Cedar Creek, there is a breaker reset in the front compartment on the back wall on the right by the hydraulics. It is a black button on a black background. There might be a small light next to it. It is next to all the electrical connections. You must open up a black protector panel, which just snaps in. It has a thumb hole to open.

[iowaborn]

I had a similar problem problem with my 2017 Silverback. That breaker looks like a buss bar. On my buss bar it turns out it is also a manual resettable breaker. I had two buttons tripped, pushed them back in and hydraulic motor worked again. Just something to keep in mind.