Nothing hydraulic works

[behmke]

Need help with hydraulics. have 4 slides that work on hydraulic and also my front legs are hydraulic. I have 13.7 volts at battery and 124 volts to converter.. All fuses are good I checked them already. Just replaced the switch on my front legs because it went out. Now I have no power to slide outs or front legs. What is my problem. 2009 Cedar Creek 36RD5S

[dblr]

Did you check the breaker in the front cargo bin behind the curved black plastic wall, it has a reset on it. Very small breaker I believe usually silver in color.

[behmke]

That where the battery is you are talking about? Or where the generator is?

[BuzzWolfAR]

In the front storage area, on the right side is a black cardboard wall. Pull it forward and you will see where the battery wires connect to the hydraulics. Each one of the 3 black boxes has a tiny button on the left side. That button is a circuit breaker. One for slides, one for legs, and one for controller.

Push each.

[Indy500]

Originally Posted by BuzzWolfAR

In the front storage area, on the right side is a black cardboard wall. Pull it forward and you will see where the battery wires connect to the hydraulics. Each one of the 3 black boxes has a tiny button on the left side. That button is a circuit breaker. One for slides, one for legs, and one for controller.

Push each.

Did it work? Keep us up to date

[behmke]

I am so happy.....mine were not black but I found the little 2 prong relays I am guessing the name of them and I had 2 of them tripped. Had it all apart and found where the little button is to reset them. Ended up being right on top of the little relay. Thanks for all the help I really appreciate what you guys done for me. Thanks again



Bryan

[dblr]

Glad all worked out for you