Turn signal camera not working

[Browner]

I have a2021 34ds FR3 and my right turn signal camera dies not work. Left side works and rear camera aswell. Says no video found. And idea what the problem might be.

[bikendan]

Originally Posted by Browner

I have a2021 34ds FR3 and my right turn signal camera dies not work. Left side works and rear camera aswell. Says no video found. And idea what the problem might be.

Moved thread to the FR3 sub-forum since the OP is asking for model-specific information.

[ForestGump34DS]

Originally Posted by Browner

I have a2021 34ds FR3 and my right turn signal camera dies not work. Left side works and rear camera aswell. Says no video found. And idea what the problem might be.

Remove the top cover of dash above switches & monitor. This cover is attached with velcro. You will see a silver box with camera connections clearly labeled. Switch camera #1 and camera #2. Does your right turn camera work now? If not, then your problem is a bad camera or wiring to the camera. If the camera now works after swapping camera inputs (and the left camera no longer works) then your problem is the video switch itself (silver box).

[BShuttleworth]

Originally Posted by Browner

I have a2021 34ds FR3 and my right turn signal camera dies not work. Left side works and rear camera aswell. Says no video found. And idea what the problem might be.

Good Morning,

I'm sorry to hear about the right turn signal camera malfunctioning. I would first suggest if you have not already, take off the cover on the top side of the dash above the radio. This will give you access to the wiring going into the radio and such.

From here, I would recommend checking to see if all of the wires are attached securely.

If you feel they are all secure, I would recommend calling our warranty department at 574-206-7600 from there. They will be able to help walk you through the steps from there.

If I can help further, please let me know.

Thanks a lot,

Brent Shuttleworth
Forest River FR3

[ForestGump34DS]

Originally Posted by ForestGump34DS

Remove the top cover of dash above switches & monitor. This cover is attached with velcro. You will see a silver box with camera connections clearly labeled. Switch camera #1 and camera #2. Does your right turn camera work now? If not, then your problem is a bad camera or wiring to the camera. If the camera now works after swapping camera inputs (and the left camera no longer works) then your problem is the video switch itself (silver box).

Pic of open dash cover....

[BShuttleworth]

Originally Posted by ForestGump34DS

Pic of open dash cover....

Teamwork! Thanks for the help!

Thanks a lot,

Brent Shuttleworth
Forest River FR3

[jeffrim]

[QUOTE=BShuttleworth;2754170]Good Morning,

I'm sorry to hear about the right turn signal camera malfunctioning. I would first suggest if you have not already, take off the cover on the top side of the dash above the radio. This will give you access to the wiring going into the radio and such.

From here, I would recommend checking to see if all of the wires are attached securely.

If you feel they are all secure, I would recommend calling our warranty department at 574-206-7600 from there. They will be able to help walk you through the steps from there.

If I can help further, please let me know.




Thanks, Brent. My left turn signal camera is not working also. Tried reversing and tightening, but no fix. Will call warranty dept. tomorrow, as you recommended.
Jeff

[Browner]

Yes i did reverse them and still no signal. Will call you. Thank you for all the replies