23dbh is home

[captaingeek]

Jus got it home. Couldnt help but testing it out as soon as we got home.

Seems to go down the road with my yukon just fine. Plenty of power.

Got a Curt wdh but couldn't attach the sway control because the chain holder was in the way. Not sure if im going to be able to use it or will need to get a different hitch setup.

[Germanrazor]

Originally Posted by captaingeek

Jus got it home. Couldnt help but testing it out as soon as we got home.

Seems to go down the road with my yukon just fine. Plenty of power.

Got a Curt wdh but couldn't attach the sway control because the chain holder was in the way. Not sure if im going to be able to use it or will need to get a different hitch setup.

WDH can be finicky. You have to connect the ball then usually raise it a bit to lessen tension to get the bars in place. Yours may be different than my Recurve 6 WDH setup however.

[Germanrazor]

Ohhhh....congrats on getting it home.

[captaingeek]

Im considering getting a recurve r3 instead the Curt wdh / sway. It look like I might need a different drop bar as this setup is slightly too high. Also theres accessories in the way of the mounting point on the TT frame and I'm not a fan of drilling into it. Any opinions on this?

[Germanrazor]

Originally Posted by captaingeek

Im considering getting a recurve r3 instead the Curt wdh / sway. It look like I might need a different drop bar as this setup is slightly too high. Also theres accessories in the way of the mounting point on the TT frame and I'm not a fan of drilling into it. Any opinions on this?

I like the Recurve 6 I have. The mounting brackets to the A-frame installed without issue of interfering with anything. I know it is not the top of the line but I like the setup and the sway control engage and dis-engage system.

Does the Curt drill into the A-frame?

[Germanrazor]

Not my unit here but a good picture of how it attaches to your A-frame.