Has anyone bypassed the motion sensor and timer in the bathroom. It has 2 white wires a blue wire and a black wire. How can I wire it to bypass the sensor
Has anyone bypassed the motion sensor and timer in the bathroom. It has 2 white wires a blue wire and a black wire. How can I wire it to bypass the sensor
What RV are you referring to?
Not all RVs have such a sensor.
Moved thread from the Tech and Repair section to the Cherokee sub-forum since the OP's questions are specific to a Cherokee product.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
First identify the power wires from the 12v supply. [ 1 Pos, and 1 Neg].
then identify the Pos and Neg going to the light fixture.
Electrically connect the two neg wires and install a manual switch between the two pos wires. And then remount the new switch in the same hole the timer came out of. DR
Linear Mode
