2016 Isata 5 Xantrex 2012 settings

[ttreed]

I was unplugged from power and on battery and heard this clicking sound. I noticed that the clock on the Microwave was cycling on and off. Voltage was 12.6 but for some reason the inverter seemed to be cycling on and off. Nothing was on in the RV to make a big draw but could not get it to stop other than disconnect batteries or plug into AC. Had to leave it to catch a flight and didn't want it to perpetually cycle. What do think is going on?

So me and my fat fingers started messing with the Xantrex SCP and may have messed up the settings on my 2016 Isata 5 with the Xantrax 2012 inv/chg with two batteries.

Does anyone have the default settings for this?

[Whalenss]

See my post 5.22 Isata 5 inverter issue.

[ttreed]

As many have said before. Thanks for the quick and good answer.

[bclemens]

I hope to post a troubleshooting guide here shortly that has the standard settings. Seems to be the #1 issue...fat fingers.

[Juniorj]

Here's what I have from Xantrex. Although my inverter was bad. Now I'm just pulling teeth because I had to take my Rig to a local dealer, who's customer service is lacking to say the least. I should have just taken it back to Dylan's in New Jersey where I bought it. Those guys rock!

[bclemens]

I will post our tech's troubleshooting in a primary thread.