1. Batteries are 4D AGM. Dekka I think is the brand...although they are build by East Penn.
2. Insulation ratings are a joke (no offense intended). I used to design modular commercial buildings and to do heat loss/heat gain calculations the wall R-value had to include glazing area and whether that area was dual pane, low-e, etc. So, what you see posted by mfg's is max R-value assuming ZERO windows. So one unit with a high R-value, might actually have a lower overall R-Value than another with a lower rating because of the glass. (So, now that we have that out of the way) The walls would be R-10+. We use the thickest fiberglass used on RV's and we use a heavier 2lb density block foam, plus all the windows are dual pane. The roof is crowned and we actually lay in R-11 batt insulation. Floor is R10 or greater as well, as it uses the same 2lb block foam as the walls. Plus, the block foam R-value actually varies by temperature. So some people will quote the HIGHEST R-value, but that R-Value might be at 12 degrees....when at 90 degrees it is a lower number.
3. Surge guard is in there.
4. Not on the TS. We're working on that now. The RB is because we designed the Dynaquest XL first and did not want separate harnesses. So the DX3 37RB got multiplex as well.
5. Yes. The new XITE system has a dedicated "Camera" button. Just hit the button and it will show the rear camera image.
6. TS has a pantry.
7. I think it still just has the two drawers because the water tank is in the lower section. We would have to move it into the bed base and I think it is too tall.
|