Dynamax Factory Reps

[bclemens]

Latest version of the DX3 should be available for download now on the website. New website just went live about 2 weeks ago.

[Tarabird48]

The 2016 Brochure not on website...the "standards and options" have been updated! The standards list both a foot flush and macerator toilet on the DX3...we are looking at a 37 TS model. Can you tell me which it has and is it a macerator toilet or a macerator discharge (SaniCon) system. Thanks for your time and patience!!!

[bclemens]

We list them both because some floor plans will have the macerator toilet based on location. (as in can't be located directly over the tank and I think for now, that is only on our rear bath floor plan). So just because it has a macerator toilet, does not mean it won't have the SaniCon system. SaniCon system is standard on the DX3. Just an omission from the brochure, which we'll get corrected.

[Tarabird48]

Thank you!!!

[halla]

Brian,
What is the Sanicon System? I have been slowly adding some of the cool options from the DX3 to our Force. I just finished adding the electric water hose reel yesterday, very happy with how that works with the coach.

[bclemens]

its just a macerator/pump. Instead of gravity, it pumps the waste out.

Sani-Con® | Products | Thetford Corporation

[halla]

That is cool, I may have to add the box mount next.

[Priusron]

I have a 2013 Dynamax Trilogy 5th wheel. We changed the bed out for our queen size. While at the Frog Rally last year (2014) we purchased a nightstand and top for the front side of the bed. I got around to installing it in March of this year. The top I'd about 4 inches too short. I was communicating with Bill Carter and he was going to get me a new top of the proper size. He has pictures and measurements that I sent him. His last communication with me was March 27. I emailed him on May 12 for an date with no response. I called Matt S. And he stated Bill still worked there and he would have him contact me. Still no contact. What is it going to take to get me the proper top for the nightstand?

[bclemens]

PM pictures and measurements to me. Bill is no longer here.

[Lloydg]

We really liked the REV that was on display at the FROG Rally. Just wish it was built with a lager payload capacity so you could tow more than just 2000 pounds. Anything coming out in a future REV that might make this possible?

[bclemens]

Only if we build that floor plan on a Sprinter.

Promaster is a 9300 lbs rated chassis. Nothing we can do about that.

[Lloydg]

Who are the Sprinter dealers in the Grand Rapids, MI area? I'd like to check those out.

[Happy Vibe]

The sprinter is the Mercedes chassis that they build the rv on. They would have to completely redesign the rv to fit the sprinter chassis.
http://m.mbsprinterusa.com/vehicle/specs/type/cab/id/13

[bclemens]

Working on that now. Not sure if we'll build the RB floor plan, but we will have a Sprinter platform. Similar size and feel to the REV but the full wall slide floor plan.

[Lloydg]

Sounds interesting. I'll stay tuned.

[Tarabird48]

We took delivery on our 2016 Dynamax DX3 TS on August 27, 2015 at Motorhomes 2 Go in Grand Rapids, MI. We live in Kansas but this dealership is the closest one that had to best price, best trade in value and best service that we were able to find. We are very pleased with our new rig. It was a tough decision between the 37 TS and 36FK models. The 36FK had a boothe/dinette configuration that was better for us, but we opted for the 37 TS for added space, storage and additional window. We planned to try to modify the booth/dinette configuration as an aftermarket process.
Just prior to heading home for Kansas we had a huge rain storm and there was a leak in the AC units. We called Dynamax in Elkhart and they graciously said that they would help us with the repair, even though they had a very busy service schedule. While here we took a factory tour yesterday and it was a very interesting and informative experience. In the process we learned that all the new DX3 TS units coming off the line have the better booth/dinette configuration (for us) that was in the 36 FK model. We were thrilled to see this and definitely would like to have our unit modified (at our expense) to the new configuration. We have a very special request...We know that you have a well defined production schedule with components specified for those units. As it is a 1600 mile round trip for us to return to Elkhart, is there any way that you could make this modification for us while we are here now at the factory? It would be so much better for us if you could. Thank you so much for your consideration and a very big Thank You to all the staff here at Dynamax for all your help. We have never encountered a more consumer responsive company in all our 20 years of RVing.

[bclemens]

So, which dinette/sofa do you have? The L-shape version that wraps around or the separate pieces? (separate sofa and separate dinette?).

The only way we could accommodate this request is if we have extras out there for some reason (i.e. a part that was ordered incorrectly, damaged, could be a scuff or something).

I'm in the office today, if you let Matt in service know I can come out and take a look. See what our options are.

[Tarabird48]

We have the wrap around "ensemble"...I will talk to Matt. Thank you so much!

[petrel]

bclemens: do you have an up to date listing of Force HD features and options? I need some clarification on how it will be equipped as I know some DX-3 features "cross over" with the HD upgrade. I am specifically looking at a Force HD 37BH.
Thank you.

[bclemens]

The main one is the chassis of course.

In addition it goes to ceramic tile in place of the vinyl flooring.
Upgraded window treatments (wood trimmed valances)
Air ride seats
Corian throughout