How is the rear TV in a Dynaquest held in. We do not use the TV in the bedroom and want to make that space into storage
Assuming a flat screen and you are not on a swing arm. All flat screens mount to a bracket of some sort. The release from these brackets is USUALLY from the bottom via a pull cord/rod or a screw and hanging like a picture on the top.
Mine does not seem to have anything to pull or push. When I use my phone camera to look behind the TV is appears to be attached with double sided tape.
My Isata3 has flat screen mounted to bedroom wall. It releases with a spring loaded lever on the right side of the mounting bracket and then just lifts off.
What year Dynaquest? It has varied. Nowadays I think we leave it open for storage behind there.
__________________ If "Search this Forum" does not yield answers, please post questions as a "New Thread" (instead of asking privately) so others can benefit from the answers.
Mine does not seem to have anything to pull or push. When I use my phone camera to look behind the TV is appears to be attached with double sided tape.
There is a lever some place sides or bottom. Double sided tape would not hold up to travel.
Linear Mode
